2024 Exmark LZX801GKA606Q1
$16,699.00
Key Features
Product Features
Description
With options to meet the needs of the most demanding landscape maintenance professionals, our top-rated Exmark Lazer Z X-Series zero-turn mowers represent the state-of-the-art in commercial mowers. Cutting deck options include our massive 96-inch UltraCut Flex Wing cutting deck and select models equipped with our exclusive cut quality enhancing Adapt Technology. Choose from rugged commercial-grade engines, including high-efficiency Electronic Fuel Injection (EFI) options equipped with our exclusive EGov and RED Technology, which can boost fuel efficiency by up to 41%. Lazer Z X-Series zero-turn mower models are available with UltraCut Series 6 decks in 52-, 60-, and 72-inch cutting widths, with or without Adapt Technology, or the 96-inch UltraCut Flex-Wing rear discharge cutting deck.
Regardless of the combination you choose for your Exmark Lazer Z zero-turn mower, you’ll ride in unmatched comfort thanks to our full-suspension seating system and smooth, easy-to-use controls that offer precision maneuverability. And from a long-term value standpoint, nothing beats the Exmark Lazer Z X-Series mower. It's the perfect combination of power, productivity, and durability. That's why it's our top-of-the-line gasoline-powered mower and should be at the top of your list.
- Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
- UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)
- A New Level of Comfort: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
- Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
- Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
- Oil Guard System: The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.
- Adapt Your Cut: Adjust deck rake quickly and easily to optimize cut quality and cutting performance for a variety of turf types and conditions. Adapt is especially useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
- UPC: 193308225128
- Starter: Electric
- Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Caster Forks: .50" thick caster yoke arms.
- Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
- Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
- Parking Brake: Lever-actuated disc brake.
- Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
- Electrical: 12-volt battery with 15-amp alternator.
- Standard Features: Engine hour meter and cup holder
- Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Transmission Speeds: Infinitely Variable
- Engine Brand: Kawasaki
- Engine Model: FX801V
- Engine Displacement: 852
- Engine Series: V-Twin
- Speed: Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
- Transmission: Hydrostatic
- Engine Spec: FX801V-MS04-R
- Drive: Hydro-Drive
- Engine Speed: 3,750 RPM
- Air Filter: Heavy-duty canister air filtration system
- Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
- Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
- Fuel Type: Gas Carbureted
- PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Drive Wheel Release: Allows unit movement without engine running.
- Fuel Indicator: Yes - electronic Sender
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.
- Carb Compliant: No
- Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS: 2-post foldable ROPS standard with seat belt and latch.
- Deck Style: Floating Deck
- Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
- Width / Cutting Deck: 60"
- Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- Blade Tip Speed: Approximately 18,500 fpm.
- Blades: 3 Blades at 20.50" Length
- Width: 72.8 in. (184.9 cm)
- Height: 70.5 in. (179.1 cm)
- Length: 83.1 in. (211.1 cm)
- Curb Weight: 1209
Engine
| Engine Manufacturer | Kawasaki |
| Engine Type | Engine Model: FX801V; Engine Series: V-Twin |
| Displacement | 852 |
General
| Transmission | Transmission Speeds: Infinitely Variable; Transmission: Hydrostatic |
| Wheel Size | Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.; Drive Tires: 24 x 12.0-12, 4-ply Turf Master® |
| Fuel Capacity | 12-gal (45.4-L), single fuel tank with single fill location. |
Deck
| Deck Size | Width / Cutting Deck: 60 in; Cutting Heights: 1.0 in (2.5 cm) to 5.5 in (11.8 cm) in 0.25 in (0.64 cm) increments adjustable from operator’s seat. |
